Merchandising Field guide
Margin vs markup: how to set retail prices in a convenience store
The margin and markup formulas with worked examples, conversion table, case cost to unit cost, price points, vendor cost changes and common pricing mistakes.
Most pricing mistakes in a c-store come from one sentence: “I put 30% on it.” Thirty percent of what? If the person who said it meant markup and the person reading the margin report thinks in margin, the store is earning less than everyone believes, on every item priced that way.
This guide covers the two formulas, how to convert between them, how to get from a case invoice to a unit cost you can price from, and how to keep prices right after vendors change costs. All numbers are illustrative. Use your own costs.
Try it: the free margin and markup calculator turns a case cost and a target margin into a rounded shelf price. It runs in your browser.
The two formulas
Both formulas start with the same profit per unit: retail price minus unit cost. They differ in what you divide by.
Markup % = (retail − cost) ÷ cost
Margin % = (retail − cost) ÷ retail
Take an illustrative candy bar that costs you $1.20 and sells for $2.00. Profit is $0.80.
- Markup: $0.80 ÷ $1.20 = 66.7%
- Margin: $0.80 ÷ $2.00 = 40.0%
Same item, same 80 cents. One number says 67, the other says 40. Neither is wrong. They answer different questions.
Margin is the one that ties to your P&L. Gross profit on the income statement is sales minus cost of goods sold, and gross margin is that divided by sales. When your accountant, your reports and your department goals talk about margin, they mean margin on retail. Markup is a handy pricing shortcut, but if you set goals in markup and read results in margin, you’ll be chasing a number that never shows up.
Pricing to a target
Going the other direction is where people slip. To hit a target margin:
Retail = cost ÷ (1 − target margin)
For the $1.20 candy bar at a 40% margin: $1.20 ÷ 0.60 = $2.00.
To hit a target markup:
Retail = cost × (1 + target markup)
At a 40% markup: $1.20 × 1.40 = $1.68. That’s a 28.6% margin, not 40%. This is the “I put 40% on it” trap. Multiplying cost by 1.4 never gives you a 40% margin.
Markup to margin conversion table
Pin this next to the office computer. The formulas behind it:
Margin = markup ÷ (1 + markup)
Markup = margin ÷ (1 − margin)
| Markup on cost | Margin on retail | Multiply cost by |
|---|---|---|
| 15% | 13.0% | 1.15 |
| 20% | 16.7% | 1.20 |
| 25% | 20.0% | 1.25 |
| 33.3% | 25.0% | 1.333 |
| 42.9% | 30.0% | 1.429 |
| 50% | 33.3% | 1.50 |
| 66.7% | 40.0% | 1.667 |
| 100% | 50.0% | 2.00 |
| 150% | 60.0% | 2.50 |
The last column is the useful one at the shelf. If you want a 30% margin, multiply cost by about 1.43. If you want 40%, multiply by about 1.67.
Shop-floor tip: When someone hands you a pricing rule, ask “on cost or on retail?” before you touch the pricebook. It takes two seconds and saves a month of thin margins.
Target margins by department
Different departments carry very different margins, and a single store-wide target hides that. The ranges below are illustrative only. They show the shape most c-stores see, not a benchmark. Your market, your contracts and your competition decide your real numbers.
| Department | Illustrative margin range | Why |
|---|---|---|
| Cigarettes | Low, often single digits to low teens | High taxes in the cost, price-sensitive buyers, manufacturer programs |
| Other tobacco, vape | Moderate | More pricing freedom than cigarettes, but still competitive |
| Beer | Low to moderate | Shoppers compare prices; distributor pricing is tight |
| Packaged beverages | Moderate to high | Singles from the cooler carry more than multipacks |
| Salty snacks, candy | Moderate to high | Impulse items, small rings |
| Grocery, HBA | Moderate to high | Convenience premium on small sizes |
| Prepared food, fountain | High | Cost is ingredients, not a finished product |
What matters is that each department has a goal you wrote down, and that you check items against it. A beer goal that would be fine for candy will make you the most expensive beer in town. A candy goal copied from beer leaves money on the counter. Our pricebook hygiene guide covers keeping departments clean so these goals actually mean something.
From case cost to unit cost
You buy by the case and sell by the unit. Every margin calculation needs the unit cost, and most wrong margins come from getting this step wrong.
Unit cost = case cost ÷ units per case
Illustrative energy drinks: $38.40 for a case of 24 cans. Unit cost is $1.60. At a target 35% margin: $1.60 ÷ 0.65 = $2.46, which you’d round to a price point (more on that below).
Pack sizes
Watch for these:
- Cases of packs. A case of gum might be 12 boxes of 10 packs. If you sell single packs, the unit count is 120, not 12.
- Vendor changes the pack. A distributor moves a flavor from 24-count to 12-count at a lower case cost. If your pricebook still says 24, your unit cost halves on paper and the margin report looks wonderful while you’re actually losing money.
- Multipacks you also sell as singles. A 6-pack and a single can should be separate items with their own cost and price, even if they come out of the same case.
Deposits and redemption values
In states with container deposit or redemption programs (bottle bills, CRV and similar), the deposit is usually charged to the customer as a separate amount and passed back through the system. In most setups it should not be part of the cost you price from or the retail you calculate margin on. If you bury the deposit in the case cost, you’ll overprice the item, or the margin report will show a margin you never earn. Rules and how vendors bill deposits differ by state, so check yours.
The same idea applies to excise taxes on tobacco and alcohol that are already included in the cost the distributor bills you. They’re part of your cost, and you can’t do anything about them, but you need them in the number.
Rounding to price points
A calculated price like $2.46 is not a shelf price. Most stores round to a small set of endings, usually .49 and .99, sometimes .29, .69 or .79. Customers read them easily, and a consistent pattern keeps the store from looking like it priced each item with a calculator.
A simple rule many stores use:
- Calculate the target price from cost and margin.
- Round up to the next allowed ending unless that pushes you past a clear competitor price or a manufacturer program price.
- If rounding up looks wrong, round down and check the margin is still within the department goal.
For the energy drink: $2.46 rounds up to $2.49. Margin becomes ($2.49 − $1.60) ÷ $2.49 = 35.7%. Rounding down to $1.99 would drop it to 19.6%, which is a different business decision, not a rounding choice.
Shop-floor tip: Decide your price endings once and write them down. Then a new hire pricing a delivery lands on the same numbers you would.
Multi-unit prices
“2 for $5” is a price point too. If a single is $2.79 and the multi-unit is 2 for $5, the deal price is $2.50 each. Check the margin at $2.50, not $2.79, because a good deal will move most of the volume to that price. Running multi-unit deals as promotions rather than editing the base price keeps the regular price, and its margin, intact when the deal ends.
When vendor costs change
Costs move constantly: a distributor price increase, a case cost that drops for a month, a manufacturer that raises list price at the start of a quarter. The question isn’t whether to reprice, it’s when.
A practical rhythm:
- Capture every cost change. When an invoice posts at a new case cost, the unit cost in the pricebook should follow. If costs only change when someone remembers to type them, your margin report is fiction. Our guide to checking in vendor deliveries covers catching cost changes at the back door.
- Review weekly, not daily. Pull a list of items now below their department margin goal. That list is your repricing work.
- Reprice what crossed the line. A two-cent increase on a candy bar that’s still well inside its goal can wait. A ten-cent increase on a fast-moving beverage that drops it under goal should move this week.
- Change the shelf the same day. A price change is not done until the shelf tag matches. A register price higher than the shelf is a customer complaint, and in some places a compliance problem.
Cost decreases deserve the same attention. If a cost drops and you keep the price, margin goes up, which may be fine. Just make it a choice, and watch for temporary allowances that will reverse.
Manufacturer price programs
Cigarette and other tobacco manufacturers, and some beverage and snack suppliers, run programs that affect your price: buydowns that lower the cost for a period, per-pack or per-unit rebates, and sometimes requirements about posted price or placement to qualify. The terms differ by manufacturer and by contract, so read your agreement.
Two things to keep straight when pricing these items:
- Know which cost you’re pricing from. If a buydown lowers your cost for eight weeks, decide whether the price follows it or whether you bank the extra margin. When the buydown ends, the cost goes back up. If the price followed it down, it has to go back up too.
- Count rebates separately. A rebate that arrives later is real money, but it isn’t in the register margin. Track it on its own line so you can see the item’s shelf margin and its total margin with the rebate. Our tobacco scan data guide explains how many of these programs report and pay.
Pricing mistakes we see most
- Using markup and calling it margin. The most common one. Fix it by putting the formula in writing and using margin everywhere.
- Stale pack sizes. The vendor changed the case and the pricebook didn’t. Unit cost is wrong, so margin is wrong.
- Deposits inside cost. Overpriced items or fake margin, depending on which way it went.
- Pricing from the last invoice only. One invoice at a deal price becomes the permanent cost, and the next regular-price delivery drops the margin with nobody noticing.
- Repricing the register and forgetting the shelf. Customers see one price and pay another.
- One margin goal for the whole store. Beer priced like candy, or candy priced like beer.
- Never checking what actually sold. A blended department margin can look fine while a handful of fast movers sit below cost. Look at the glossary if any of these terms are unfamiliar, and check item-level margin regularly.
How CornerHawk handles it
In the CornerHawk pricebook, you enter case cost and case size and the unit cost follows, with margin and profit per unit shown next to the retail price as you type. Departments carry a margin goal and a default tax, and you can filter for items below their department goal to build your repricing list. Posting a vendor invoice updates unit cost and the vendor case cost. Shelf labels queues every item whose shelf price changed since its last printed label, or pushes the new price to eLabels. The reports center includes a live items report with cost and retail at sale and profit per line, plus a manufacturer rebates report.
Quick answers
What is the difference between margin and markup?
Both compare profit to something, but markup divides profit by cost and margin divides profit by the selling price. The same item always has a higher markup percentage than margin percentage.
How do I price an item to hit a target margin?
Divide the unit cost by one minus the target margin. For a 40% margin on a $1.20 item, that's $1.20 divided by 0.60, which is $2.00, before you round to a price point.
Should bottle deposits be part of my cost when I calculate margin?
Usually not. A deposit or redemption value is typically charged to the customer as a separate line and passed through, so leave it out of both cost and retail when you work out margin. Check how your state and your vendor handle it.
How often should I reprice after a vendor cost change?
Reprice when the change pushes an item below its department margin goal, not every time a cost moves by a cent. Many stores review cost changes weekly and batch the shelf tag updates.